Pour Concrete Driveway Cost in Maryland (2026)
Average cost in Maryland: $7 - $22 per square foot
A typical two-car (650 sq ft) costs $4,680 - $14,040 in Maryland
How Maryland Compares
Maryland is +20% above the national average for pour concrete driveway.
Maryland Typical Cost
$4,680 - $14,040
National Average
$3,900 - $11,700
Average labor rate in Maryland: $52/hour
Maryland Notes
DC-area has higher costs; Chesapeake Bay environmental rules
State sales tax on materials: 6.00%
Calculate Your Maryland Cost
Your Estimated Cost
$4,680 - $14,040
Based on 650 square foots in Maryland
Prices updated March 2026
Cost Breakdown
What This Means
For 650 square foots in Maryland, expect to pay $4,680-$14,040 with mid-range materials that balance quality and cost.
About $3,744 goes to materials and $4,212 covers labor. At $14 per square foot, your project is 20% above the national average.
This is a moderate investment—about the cost of a used car. Many homeowners finance projects this size with a home equity line or contractor financing.
Tips for your project:
- •Maryland runs high—consider getting quotes from neighboring areas if feasible.
- •A smaller 455 square foot project would run about $6,552.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$3,510 - $10,530
-$3,510 (-37%)
Premium materials
Upgrade to high-end finishes
$6,318 - $18,954
+$1,170 (13%)
Smaller (488 square foots)
Reduce project scope by 25%
$3,514 - $10,541
-$3,504 (-37%)
Larger (813 square foots)
Expand project scope by 25%
$5,854 - $17,561
+$396 (4%)
DIY installation
Do the work yourself (materials only)
$7,160 - $9,688
-$936 (-10%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Pour Concrete Driveway requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $9,360 quote—and what's not?
What's included in your $9,360 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4Who handles the permit application and inspection scheduling?
Who handles the permit application and inspection scheduling?
Why ask: Permits ensure work meets code and protect your home's resale value.
Red flag: Resistance to pulling permits or suggesting you "don't need one."
5What's your payment schedule, and what triggers each payment?
What's your payment schedule, and what triggers each payment?
Why ask: Standard is a small deposit, then payments tied to milestones.
Red flag: Demanding 50%+ upfront or full payment before work begins.
Show 1 more questions
6What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Concrete Driveway Cost by City in Maryland
| City | Cost Range (per square foot) | vs. National |
|---|---|---|
| Baltimore | $7 - $21 | +15% |
Concrete Driveway in Maryland FAQs
How much does pour concrete driveway cost in Maryland?
Pour Concrete Driveway in Maryland costs $7 - $22 per square foot in 2026. For a typical two-car (650 sq ft), expect to pay $4,680 - $14,040. Maryland is +20% above the national average.
Do I need a permit for pour concrete driveway in Maryland?
Yes, permits are typically required for pour concrete driveway in Maryland. DC-area has higher costs; Chesapeake Bay environmental rules. Always check with your local building department before starting work.
What is the average labor rate in Maryland?
The average skilled trade labor rate in Maryland is $52/hour in 2026. This is above the national average. Labor typically accounts for 45% of total pour concrete driveway costs.
Is Maryland expensive for home improvements?
Maryland is +20% more expensive than the national average for home improvement projects. High labor costs and material prices drive up costs.
How do I find a contractor for pour concrete driveway in Maryland?
To find a reputable contractor in Maryland: 1) Get 3+ quotes from licensed contractors, 2) Verify their Maryland contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.