Pour Concrete Driveway Cost in Alabama (2026)
Average cost in Alabama: $5 - $15 per square foot
A typical two-car (650 sq ft) costs $3,198 - $9,594 in Alabama
How Alabama Compares
Alabama is -18% below the national average for pour concrete driveway.
Alabama Typical Cost
$3,198 - $9,594
National Average
$3,900 - $11,700
Average labor rate in Alabama: $34/hour
Alabama Notes
Birmingham metro slightly higher; tornado-zone considerations
State sales tax on materials: 4.00%
Calculate Your Alabama Cost
Your Estimated Cost
$3,198 - $9,594
Based on 650 square foots in Alabama
Prices updated March 2026
Cost Breakdown
What This Means
For 650 square foots in Alabama, expect to pay $3,198-$9,594 with mid-range materials that balance quality and cost.
About $2,558 goes to materials and $2,878 covers labor. At $10 per square foot, your project is 18% below the national average.
This is a moderate investment—about the cost of a used car. Many homeowners finance projects this size with a home equity line or contractor financing.
Tips for your project:
- •A smaller 455 square foot project would run about $4,477.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$2,399 - $7,196
-$2,399 (-38%)
Premium materials
Upgrade to high-end finishes
$4,317 - $12,952
+$800 (13%)
Smaller (488 square foots)
Reduce project scope by 25%
$2,401 - $7,203
-$2,394 (-37%)
Larger (813 square foots)
Expand project scope by 25%
$4,000 - $12,000
+$271 (4%)
DIY installation
Do the work yourself (materials only)
$4,893 - $6,620
-$640 (-10%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Pour Concrete Driveway requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $6,396 quote—and what's not?
What's included in your $6,396 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4Who handles the permit application and inspection scheduling?
Who handles the permit application and inspection scheduling?
Why ask: Permits ensure work meets code and protect your home's resale value.
Red flag: Resistance to pulling permits or suggesting you "don't need one."
5What's your payment schedule, and what triggers each payment?
What's your payment schedule, and what triggers each payment?
Why ask: Standard is a small deposit, then payments tied to milestones.
Red flag: Demanding 50%+ upfront or full payment before work begins.
Show 1 more questions
6What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Concrete Driveway in Alabama FAQs
How much does pour concrete driveway cost in Alabama?
Pour Concrete Driveway in Alabama costs $5 - $15 per square foot in 2026. For a typical two-car (650 sq ft), expect to pay $3,198 - $9,594. Alabama is -18% below the national average.
Do I need a permit for pour concrete driveway in Alabama?
Yes, permits are typically required for pour concrete driveway in Alabama. Birmingham metro slightly higher; tornado-zone considerations. Always check with your local building department before starting work.
What is the average labor rate in Alabama?
The average skilled trade labor rate in Alabama is $34/hour in 2026. This is below the national average. Labor typically accounts for 45% of total pour concrete driveway costs.
Is Alabama expensive for home improvements?
Alabama is 18% less expensive than the national average for home improvement projects. Lower labor rates and competitive markets keep costs down.
How do I find a contractor for pour concrete driveway in Alabama?
To find a reputable contractor in Alabama: 1) Get 3+ quotes from licensed contractors, 2) Verify their Alabama contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.