Install Metal Roof Cost in Pennsylvania (2026)
Average cost in Pennsylvania: $8 - $30 per square foot
A typical average home (2,000 sq ft) costs $16,960 - $59,360 in Pennsylvania
How Pennsylvania Compares
Pennsylvania is +6% above the national average for install metal roof.
Pennsylvania Typical Cost
$16,960 - $59,360
National Average
$16,000 - $56,000
Average labor rate in Pennsylvania: $46/hour
Pennsylvania Notes
Philadelphia expensive; rural PA more affordable
State sales tax on materials: 6.00%
Calculate Your Pennsylvania Cost
Your Estimated Cost
$16,960 - $59,360
Based on 2000 square foots in Pennsylvania
Prices updated March 2026
Cost Breakdown
What This Means
For 2000 square foots in Pennsylvania, expect to pay $16,960-$59,360 with mid-range materials that balance quality and cost.
About $20,988 goes to materials and $13,356 covers labor. At $19 per square foot, your project is 6% above the national average.
This is a significant home investment. Most homeowners use home equity loans, refinancing, or save up over 1-2 years for projects in this range.
Tips for your project:
- •A smaller 1400 square foot project would run about $26,712.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$12,720 - $44,520
-$15,900 (-42%)
Premium materials
Upgrade to high-end finishes
$22,896 - $80,136
+$1,908 (5%)
Smaller (1500 square foots)
Reduce project scope by 25%
$12,720 - $44,520
-$15,900 (-42%)
Larger (2500 square foots)
Expand project scope by 25%
$21,200 - $74,200
-$1,060 (-3%)
DIY installation
Do the work yourself (materials only)
$29,192 - $39,496
-$3,816 (-10%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Install Metal Roof requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $38,160 quote—and what's not?
What's included in your $38,160 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4What manufacturer warranty comes with the materials, and do you offer a workmanship warranty?
What manufacturer warranty comes with the materials, and do you offer a workmanship warranty?
Why ask: Material warranties alone don't cover installation errors.
Red flag: No workmanship warranty or only verbal guarantees.
5Who handles the permit application and inspection scheduling?
Who handles the permit application and inspection scheduling?
Why ask: Permits ensure work meets code and protect your home's resale value.
Red flag: Resistance to pulling permits or suggesting you "don't need one."
Show 2 more questions
6What's your payment schedule, and what triggers each payment?
What's your payment schedule, and what triggers each payment?
Why ask: Standard is a small deposit, then payments tied to milestones.
Red flag: Demanding 50%+ upfront or full payment before work begins.
7What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Metal Roof Installation Cost by City in Pennsylvania
| City | Cost Range (per square foot) | vs. National |
|---|---|---|
| Philadelphia | $9 - $33 | +18% |
Metal Roof Installation in Pennsylvania FAQs
How much does install metal roof cost in Pennsylvania?
Install Metal Roof in Pennsylvania costs $8 - $30 per square foot in 2026. For a typical average home (2,000 sq ft), expect to pay $16,960 - $59,360. Pennsylvania is +6% above the national average.
Do I need a permit for install metal roof in Pennsylvania?
Yes, permits are typically required for install metal roof in Pennsylvania. Philadelphia expensive; rural PA more affordable. Always check with your local building department before starting work.
What is the average labor rate in Pennsylvania?
The average skilled trade labor rate in Pennsylvania is $46/hour in 2026. This is above the national average. Labor typically accounts for 35% of total install metal roof costs.
Is Pennsylvania expensive for home improvements?
Pennsylvania is +6% more expensive than the national average for home improvement projects. Costs are moderate compared to other states.
How do I find a contractor for install metal roof in Pennsylvania?
To find a reputable contractor in Pennsylvania: 1) Get 3+ quotes from licensed contractors, 2) Verify their Pennsylvania contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.