Install Bathroom Faucet Cost in Maryland (2026)
Average cost in Maryland: $180 - $720 per each
A typical standard faucet with installation costs $180 - $720 in Maryland
How Maryland Compares
Maryland is +20% above the national average for install bathroom faucet.
Maryland Typical Cost
$180 - $720
National Average
$150 - $600
Average labor rate in Maryland: $52/hour
Maryland Notes
DC-area has higher costs; Chesapeake Bay environmental rules
State sales tax on materials: 6.00%
Calculate Your Maryland Cost
Your Estimated Cost
$180 - $720
Based on 1 each in Maryland
Prices updated March 2026
Cost Breakdown
What This Means
For 1 each in Maryland, expect to pay $180-$720 with mid-range materials that balance quality and cost.
About $270 goes to materials and $158 covers labor. At $450 per each, your project is 20% above the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •Maryland runs high—consider getting quotes from neighboring areas if feasible.
- •DIY could save you $225, but budget extra time and factor in your skill level.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$135 - $540
-$135 (-30%)
Premium materials
Upgrade to high-end finishes
$243 - $972
+$117 (26%)
DIY installation
Do the work yourself (materials only)
$191 - $259
-$225 (-50%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Install Bathroom Faucet requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $450 quote—and what's not?
What's included in your $450 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4Will you pull the permit, or do I need to?
Will you pull the permit, or do I need to?
Why ask: Licensed contractors should handle permits for code compliance.
Red flag: Suggesting you skip the permit to "save money."
5What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Faucet Installation Cost by City in Maryland
| City | Cost Range (per each) | vs. National |
|---|---|---|
| Baltimore | $173 - $690 | +15% |
Faucet Installation in Maryland FAQs
How much does install bathroom faucet cost in Maryland?
Install Bathroom Faucet in Maryland costs $180 - $720 per each in 2026. For a typical standard faucet with installation, expect to pay $180 - $720. Maryland is +20% above the national average.
Do I need a permit for install bathroom faucet in Maryland?
Permits are generally not required for install bathroom faucet in Maryland. DC-area has higher costs; Chesapeake Bay environmental rules. Always check with your local building department before starting work.
What is the average labor rate in Maryland?
The average skilled trade labor rate in Maryland is $52/hour in 2026. This is above the national average. Labor typically accounts for 35% of total install bathroom faucet costs.
Is Maryland expensive for home improvements?
Maryland is +20% more expensive than the national average for home improvement projects. High labor costs and material prices drive up costs.
How do I find a contractor for install bathroom faucet in Maryland?
To find a reputable contractor in Maryland: 1) Get 3+ quotes from licensed contractors, 2) Verify their Maryland contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.