Refinish Hardwood Floors Cost in Texas (2026)
Average cost in Texas: $3 - $8 per square foot
A typical main floor (600 sq ft) costs $1,692 - $5,076 in Texas
How Texas Compares
Texas is -6% below the national average for refinish hardwood floors.
Texas Typical Cost
$1,692 - $5,076
National Average
$1,800 - $5,400
Average labor rate in Texas: $42/hour
Texas Notes
Varies widely; Austin expensive, rural areas affordable
State sales tax on materials: 6.25%
Calculate Your Texas Cost
Your Estimated Cost
$1,692 - $5,076
Based on 600 square foots in Texas
Prices updated March 2026
Cost Breakdown
What This Means
For 600 square foots in Texas, expect to pay $1,692-$5,076 with mid-range materials that balance quality and cost.
About $1,015 goes to materials and $2,200 covers labor. At $6 per square foot, your project is 6% below the national average.
This is a smaller project that most contractors will complete in a day or two. Many handle this with cash savings or a small personal loan.
Tips for your project:
- •A smaller 420 square foot project would run about $2,369.
- •Always get 3 quotes—prices can vary 20-30% between contractors.
What If...
Budget materials
Use builder-grade or economy materials
$1,269 - $3,807
-$1,269 (-37%)
Premium materials
Upgrade to high-end finishes
$2,284 - $6,853
+$423 (13%)
Smaller (450 square foots)
Reduce project scope by 25%
$1,269 - $3,807
-$1,269 (-37%)
Larger (750 square foots)
Expand project scope by 25%
$2,115 - $6,345
+$141 (4%)
DIY installation
Do the work yourself (materials only)
$1,438 - $1,946
-$1,692 (-50%)
What to Ask Your Contractor
1Are you licensed and insured for this type of work?
Are you licensed and insured for this type of work?
Why ask: Protects you from liability if someone gets hurt on your property.
Red flag: Hesitation or claims that insurance "isn't necessary" for this job.
2Can I see references from similar projects?
Can I see references from similar projects?
Why ask: Refinish Hardwood Floors requires specific experience. Past work shows capability.
Red flag: Unable to provide any references or only has very old ones.
3What's included in your $3,384 quote—and what's not?
What's included in your $3,384 quote—and what's not?
Why ask: Prevents surprise charges for permits, disposal, or finishing work.
Red flag: Vague answers or unwillingness to put details in writing.
4Is subfloor prep included, and how do you handle transitions to other rooms?
Is subfloor prep included, and how do you handle transitions to other rooms?
Why ask: Subfloor condition affects the entire installation. Transitions are often overlooked.
Red flag: Subfloor prep "to be determined" with no estimate.
5What's the realistic timeline, and what could cause delays?
What's the realistic timeline, and what could cause delays?
Why ask: Honest contractors set expectations. Weather, material backorders, and inspections cause delays.
Red flag: Unrealistically short timelines or guarantees of "no delays."
Hardwood Refinishing Cost by City in Texas
| City | Cost Range (per square foot) | vs. National |
|---|---|---|
| Houston | $3 - $9 | -2% |
| San Antonio | $3 - $8 | -8% |
| Dallas | $3 - $9 | +2% |
| Austin | $3 - $10 | +8% |
| Fort Worth | $3 - $9 | -2% |
| El Paso | $3 - $8 | -15% |
| Arlington | $3 - $9 | Avg |
Hardwood Refinishing in Texas FAQs
How much does refinish hardwood floors cost in Texas?
Refinish Hardwood Floors in Texas costs $3 - $8 per square foot in 2026. For a typical main floor (600 sq ft), expect to pay $1,692 - $5,076. Texas is -6% below the national average.
Do I need a permit for refinish hardwood floors in Texas?
Permits are generally not required for refinish hardwood floors in Texas. Varies widely; Austin expensive, rural areas affordable. Always check with your local building department before starting work.
What is the average labor rate in Texas?
The average skilled trade labor rate in Texas is $42/hour in 2026. This is near the national average. Labor typically accounts for 65% of total refinish hardwood floors costs.
Is Texas expensive for home improvements?
Texas is 6% less expensive than the national average for home improvement projects. Costs are moderate compared to other states.
How do I find a contractor for refinish hardwood floors in Texas?
To find a reputable contractor in Texas: 1) Get 3+ quotes from licensed contractors, 2) Verify their Texas contractor license, 3) Check reviews and references, 4) Confirm insurance coverage, 5) Get a detailed written contract.